Parts & Accessories

Bontrager's Cargo Net keeps your gear lashed to your bike rack perfectly. The stretch webbing attaches with four hooks.

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts

The Problem Solvers Seatpost Clamp with Rack Mounts is an ingenious adapter that gives you a super-secure and clean way to mount a rear rack on your bicycle. This light and durable aluminum piece simply takes the place of your seat tube collar. It includes a stainless-steel binder bolt and 2 5mm screws for rack attachment.

The B-RAD Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base. Most commonly used for smaller, curved or dual suspension frames where the slotted bases won't fit or are not needed.

Storage made simple Pack the essentials for every ride with the Bontrager Storage Bottle. It features secure storage for multi-tool, tubes, tire lever, CO2, and patch kit that easily fits in any standard water bottle cage. Key features - Wide opening for easy access - Fits in standard water bottle cages - Securely holds tools, CO2, spare tube, tire levers and more

Electra's Seatpost Clamp w/Rack Mounts is the crucial link between your bike and your rear rack. It replaces the standard seatpost clamp to allow rack installation on bikes not originally fitted with rack eyelets.

Keep your cargo where you go. Hold everything in place to make sure you arrive with what you left with. This elastic band includes hook clips to secure cargo to the rear rack (sold separately). Help keep your cargo in place. - Elastic band with hook clips to secure cargo to rear rack (sold separately) - Fits all Electra rear racks

Easy on, easy off storage Genuine Bontrager replacement parts for your Trunk, Pannier, Quick Cleat and Handlebar Bracket Interchange bag systems. Product details - Designed to allow Bontrager Interchange Handlebar Baskets to fit 31.8mm bars - Includes a pair of 31.8mm clamps

Surly's Dummy Rail Collars are nothing more than a simple clamping device that buttresses the connection between your Big Dummy Frame and the Dummy Rails. They increase the stiffness of the interface of these two parts and help keep your cargo from getting its salad tossed… unless of course your Dummy Bags are filled with tossed salad. These are designed specifically for use with the Big Dummy frame and Dummy rails, and will not work with Xtracycle rails. WARNING: Properly installed Dummy Rail Collars are required for carrying live cargo on your Big Dummy.

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

The Lizard Skins Utility Strap is an easy way to stow essential tools and a spare tube. The minimally designed Utility Strap is a lightweight on-bike storage solution for any rider. This versatile system is made to securely attach under seats and other locations on bike frames. The Utility Strap has a wide strap and durable metal buckle. - On-bike storage solution - Inner sleeve to compress the tube - Multiple spots for tools: CO2, Tire Lever, Multi-tool, etc. - Wide strap and durable metal buckle - Silicone and rubber grip for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 4oz

- Interface plates for luggage carrier rack to convert any non MIK ready carrier & non MIK ready bicycle bag to a MIK system (for use with Basil bags only) - Compatible with luggage carriers from 80 up to 150 mm - -01: carrier plate for rear racks that are not MIK ready. - -02: adapter plate for bicycle rear bags that are not MIK ready - Suitable for e-bikes - Max load: 26lbs/12kg

If you have unconventional handlebars (sold separately) but still want a bag with easy access when riding then pick up Ortlieb's Extension Mounting Set for the Ultimate5 handlebar bag (sold separately). It pushes the bag out front further than normal so you can still use your fun hand positions and enjoy the convenience of a handlebar bag.

The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two

Lower mount kit for all Salsa's Alternator Racks (sold separately)

The Salsa EXP Series 35.0 Anything Cradle Arms are for mounting the Salsa EXP Series Anything Cradle (sold separately) to handlebars with a 35.0mm or 31.8mm clamp diameter. - Compatible with 35.0mm bars or 31.8mm bars (with included shims) - Compatible with all Salsa EXP Series Anything Cradles - Hinged clamps allow for easy installation and removal from handlebars - Made of 6061 forged aluminum

All the hardware for the lower portion of your Surly rear rack. Stainless steel.

Surly's Junk Straps are basically really long toe straps. They're 120cm woven nylon with a stainless steel buckle. Surly had them made to specification to ensure that they work well and last a long time. They're easy to use and they stay tight. Once you're ready, loosening them is quick and easy. They're light, pack small, and securely and conveniently attach all kinds of stuff to your rack, basket, handlebar, backpack, under your seat, around your thigh…just about anyplace. You can combine them for even longer straps. - Pack of 6

Add some colorful flair and a zippered pocket to your wicker basket (sold separately) with Electra's Basket Band.

What should you do with all those small, but important extras on your bikepacking tour? The best place to put your snacks, smartphone, rain slicker, and other items is in your ORTLIEB Accessory-Pack. This convenient volume expander for your Handlebar-Pack keeps your things secure, absolutely waterproof, and quickly accessible at all times. Use the metal hooks to securely attach the Accessory-Pack to the four points of attachment on the Handlebar-Pack. And if you don't plan on spending the night outdoors and don't need your Handlebar-Pack, you can still use your Accessory-Pack as a handlebar bag thanks to its pre-mounted Velcro straps. You can even use the carrying strap to transform the lightweight bag into a shoulder or hip bag.

Surly Front Rack Hardware

Ortlieb's Ultimate6 Mounting Set uses an integrated lock to secure your Ultimate6 bag (sold separately) to your bars. Additionally, the lid of the Classic, Plus and Pro models can also be locked. Whether you need one to mount the bag on a different bike or simply want spare parts for a long tour, the mounting set is an indispensable part of the Ultimate6 system.

Suitable as a tourniquet or stylish headband in a pinch, the Whip Lash's primary function is to help you attach whatever needs attaching to your bicycle frame. Available in a multi-pack that includes two 550mm lashes and one 695mm lash, the Whip Lash's potential is limited only by your imagination. You could use one to strap your beverage to the down tube when the trail says you ought to keep your hands on the bars. Or you could use another to fix your fishing gear to the top tube when rack space is maxed out. Whatever you get into on or off the bike, they're handy to have around because they're light, compact, and easy to use. Rubberized on one side to keep your stuff from slipping around, the Whip Lash's trimmable design features nylon construction and a simple hook-and-loop style closure.

A classic Wald design, this Flashlight Holder can clamp a standard size flashlight to your handlebar or serve as a convenient wall mount.

- All-weather polypropylene basket - Fully adjustable aluminum and composite quick-release bracket - Handlebar mount is compatible with 22.2mm and 31.8mm handlebars

- Fits Sunlite 4506/45119 alloy racks

Topeak's front basket handlebar fixer fits standard bikes or eBikes with display units. - Fits up to 1-inch handlebars