Skip to main content

Orders may take longer than usual. We appreciate your patience.

Filter By:

  • Show More Brands

  • Show Fewer Brands

Hubs

Bontrager Rapid Drive 108 Fat Rear Hub
$199.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high quality wheelset. Product details - Bontrager rear hub for use with 197mm dropouts - Rapid Drive 108 hub instantly transfers effort into forward momentum - Flange diameter: 58mm - NDS flange offset: 59.5mm - DS flange offset: 46mm - 32 hole, 6-bolt rotor
SRAM 746 Rear Disc Hub
$143.00
High quality sealed bearing hub is available in traditional and modern configurations. - Steel axle, aluminum end caps with steel knurled contact surfaces - Same proven driver mechanism as higher priced models - Spoke Interface: J-Bend - Hub/Brake Compatibility: 6-Bolt Disc - Skewer Included: No - Bearing Type: Sealed Cartridge
Bontrager Rapid Drive Boost Front Hub
$74.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset. Product details - Bontrager front hub for use with 110mm forks - Flange diameter: 58mm - NDS flange offset: 25.5mm - DS flange offset: 37.75mm - 28 hole, 6-bolt rotor
Sturmey-Archer 8-Speed Drum Brake Rear Hub
$160.97
- Internal gear 8-speed hub with 70mm drum brake - Rotary gear selection with no protruding indicator chain or switch box - Direct drive in first gear allows use of smaller chainwheels - A356 aluminum hub shell with 13/32" slotted solid axle (185mm overall axle length) - Gear ratio range of 325% - Includes 3-spline 23 tooth cog and a TSS86 twist shifter. Brake lever sold separately
Chris King R45D Centerlock Front
$264.00
R45 Centerlock hubs combine a lightweight hub body, our legendary made-in-house bearings, and now Centerlock compatibility to harness the power of disc brakes. The result is the increased power and modulation of disc brakes, the fast, smooth rolling speed of our bearings, and the rail steering from our one piece solid axles. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Engineered, manufactured and assembled in Portland, Oregon USA - Legendary made-in-house bearings - 5-year built-to-last warranty - Easily convertible axles 100mm x 9mm QR or 100mm x 12mm thru axle front options. - Easily serviceable and completely re-buildable with our R45 Hub Service Tool
Bontrager Rapid Drive 54 Boost Rear Hub
$149.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset. Product details - Rapid Drive 54 hub quickly and efficiently transfers effort into forward momentum - Wheels are upgradeable to 108 points of instant engagement - Bontrager rear hub for use with 148mm dropouts - Flange diameter: 58mm - NDS flange offset: 35.5mm - DS flange offset: 21.5mm - 28 hole, 6-bolt rotor
Bontrager Rapid Drive 54 Non-Boost Rear Hub
$149.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset. Product details - Rapid Drive 54 hub quickly and efficiently transfers effort into forward momentum - Wheels are upgradeable to 108 points of instant engagement - Bontrager rear hub for use with 142mm dropouts - Flange diameter: 58mm - NDS flange offset: 32mm - DS flange offset: 18.5mm - 28 hole, 6-bolt rotor - Equipped with Shimano/SRAM freehub body, SRAM XD available separately
Chris King R45 Rear
$451.00
When we set out to design our R45 hub we had over 30 years of bearing experience and 20 years of building hubs under our belts. The R45 is the culmination of that experience; we focused on creating a lightweight road racing hub that utilized hallmarks of Chris King components: precision, performance, and quality. Our R45 rear hub combines a redesigned RingDrive system with 45 teeth for lower drag and near instant engagement with a lightweight hub body and our legendary made-in-house bearings. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. The patented Chris King RingDrive with 45-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our R45 Hub Service Tool
Chris King ISO SD Front
$241.00
The Chris King ISO Small Diameter (SD) front hub is designed for mountain bikers seeking a lightweight hub that doesn’t compromise performance. Milled from solid bar stock, the high flange diameter grants the use of shorter spokes and a wider bracing angle to increase wheel strength. Proven by professionals and chosen by privateers, our ISO SD hub puts you in the race with legendary Chris King performance. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our Chris King Hub Service Tool - Responsibly lightweight - Easily convertible between standard QR and 15x100mm axles - Drilling: 32h
Shimano SLX M7100 Front Hub
$43.99
With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-free 15mm thru axle system is stiff and lightweight - Simple setup and reliable trail performance
Bontrager Rapid Drive non-Boost Front Hub
$74.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset. Product details - Bontrager front hub for use with 100mm forks - Flange diameter: 58mm - NDS flange offset: 20.5mm - DS flange offset: 32.75mm - 28 hole, 6-bolt rotor
Shimano Dura-Ace Track Hi-Flange Rear Hub
$186.99
Shimano's Track Dura-Ace Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed. You get your choice of single or double-sided cog threading.
Shimano Dura-Ace Track HB-7710 Low-Flange Front Hub
$130.99
- Aluminum Hub Shell - Over Locknut: 100mm - Stainless Steel Ball Bearings - Spoke Hole Circle: 38mm - Center to Flange (Right): 37mm - Center to Flange (Left): 37mm - Average Weight: 203g
Shimano Dura-Ace Track HB-7710 Low-Flange Rear Hub
$153.99
- Aluminum Hub Shell - Super polished Bearing Races - Over Locknut: 120mm - Stainless Steel Ball Bearings - Contact Sealing: Dust Cap - Average Weight: 298g (w/o lockring)
Shimano Alfine Centerlock Dynamo Hub
$120.99
Shimano Alfine Center Lock Dynamo Front Hub - Compatible with 26 to 28-inch wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Spoke Interface: J-Bend - Weight: 575g
Shimano Shimano Nexus Dynamo Front Hub
$107.99
- Compatible with 26 to 28" wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output
Shimano Deore XT M8100 Front Hub
$54.99
With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance
Shimano Saint Front Hub
$93.99
From World Cup DH runs to sessioning your local trails, Shimano's Saint front hub is the answer. Centered around an oversize hub shell and a 20mm thru-axle, the Saint Front Hub is rock solid, with beefy flanges and Shimano's angular contact bearings, which balance destructive impacts from any direction. And, Shimano's Centerlock Rotor Mount makes installing rotors a breeze.
Shimano Dura-Ace Track Hi-Flange Front Hub
$168.99
Shimano's Dura-Ace Track Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed.
HALO DJD Bush Drive Replacement Drive Ring
$13.90
- Replacement drivers for Original DJD or DJD-Bush Drive rear hub - Need DJD Bush Drive removal tool (sold separately)
Syntace Syntace X-Fix Allen Key
$20.00
- X-Fix allen key installs and removes x-12 Axles and clips into an x-12 Axle when not in use
HALO 6D Road Disc Hubs
$89.95
- Front: 9 x 100mm quick-release, 24-hole - Rear: 10 x 130mm quick-release, 24-hole - Lightweight and silky smooth 7075 alloy road racing hubs use straight pull spokes - Front has 2 sealed bearings, alloy axle - Rear features 6 pawls with double tips giving 12 point simultaneous engagement on a 30 point drive ring (12 degree engagement), CNC 7075 hard aluminum cassette body with Shimano HG splines, plus 4 sealed cartridge bearings and a lightweight alloy axle - Shimano/SRAM 8-10 speed (with spacer), Shimano/SRAM 11-speed road cassette compatible
HALO Rear Axle Conversion, Spin Doctor Pro
$19.95
- Rear axle conversions for Spin Doctor Pro rear hub - Various replacement axles and conversion kits for Spin Doctor and Spin Doctor Pro hubs - Some conversions utilize pre-existing axle components for retrofit - Conversion kits for original Spin Doctor and Spin Doctor Pro hubs are not compatible with Spin Doctor 6-Drive hubs
WeThePeople Supreme Front Hubs
$83.99
The partner in crime to WeThePeople's Supreme Rear Cassette Hub, the matching Supreme Front Hub uses high-quality Japanese sealed bearings and a beefy, heat-treated 4130 chromoly axle held on with 10mm female bolts. Match it up with WTP nylon fiberglass Supreme front hub guards and you have a dialed front-end setup. - 14mm hollow/hardened heat treated chromoly axle - 10mm female bolts
Chris King R45 Front
$230.00
The R45 front hub is built to address our road and cross riders’ demands for Chris King performance in a lighter weight and more aerodynamic package. Defined by a narrow hub body and low flanges the R45 front hub is a sleek base for the fastest wheels. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our R45 Hub Service Tool
SRAM 900 Front Hub
$83.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Fully convertible with tool-free end caps - 24, 28 or 32 spoke holes
HALO Quick Release Endcaps, Spin Doctor 6F (Front)
$14.95
- 9 x 100mm quick-release endcaps for Spin Doctor 6F (front) - Conversion kits for Spin Doctor 6-Drive hubs are not compatible with original Spin Doctor or Spin Doctor Pro hubs
Stan's NoTubes 3.30HD Shimano/SRAM Steel Freehub Body (9/10-speed)
$74.00
Replacement Shimano/SRAM steel freehub body for Stan's NoTubes 3.30HD rear hubs.
Shimano HB-RS470 Front Hub
$29.99
The Shimano HB-RS470 front disc brake hub features a Center Lock design, Internal Grease Sleeve, and Cup and Cone Bearing technology. - The Center Lock system makes for easy rotor installation with a quick and secure spline mount and lock ring - Hub features internal o-rings and a grease sleeve that helps maintain grease levels and increases service life
Shimano Deore HB-T610 Rim Brake Front Hub
$18.99
Made for trekking bikes with rim brakes, the SHIMANO DEORE T610 front hub offers durable and reliable performance thanks to its high-quality sealing and angular contact bearings. - Double contact sealing - Super polished bearing races for low-friction rolling
Page 1 of 4 Next page