Skip to main content

Orders may take longer than usual. We appreciate your patience.

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Headsets

Trek Madone Factory Overstock Top Half Headset
$20.00 $79.99 75% Off
- Upper Headset Assembly for 2010+ Madone - Bearing, Compression Ring, 15mm Top Cap - Go green and save green — Zero packaging means zero waste and zero extra cost
Cane Creek 110 ZS44 Headset Top (Tall)
$85.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 Series headsets. • Technical Description: ZS44/28.6/H15/K|ZS44/30/H4/x • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 15mm • Top Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 • Weight: 95.62g
FSA Orbit CF-40
$82.99
- Carbon fiber top cover - Upper: Campagnolo angular contact bearings (black seal) - 1-1/8-inch, 45 degrees/ 45 degrees ACB upper - 1.5-inch, 36 degrees/ 45 degrees ACB lower - For tapered 46mm/56mm OD headtube - For 1-1/8-inch to 1.5-inch tapered fork
Cane Creek Interlok Spacers
$11.00
- color-matched aluminum Interlok Spacers for Cane Creek headsets
FSA Internal Headset Upper
$21.99
A new headset gives you a new lease on life. This is the upper part of an integrated headset for a 44mm headtube. - Lower part of the headset sold separately
Cane Creek ViscoSet Headset Top
$80.00
ViscoSet offers viscous damping to make bicycles safer by inhibiting the uncontrolled steering oscillation known as speed wobble. "Speed wobble" or "head shake" are vibrations that start small and get worse due to harmonics. This frightening shimmy can affect the handling of any bicycle under certain conditions and is the result of many different factors. - Interlok spacer compatible - Fully face sealed crown race - Dependable black-oxide, sealed cartridge bearings - Pre-Greased cartridge, no re-grease needed
Cane Creek 40 IS41/IS52 Tapered Headset
$60.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS41/28.6/H9/K|IS52/40/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 41.1mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 87g
Cane Creek 110 Series Bottom External Cup
$75.00
This is the Bottom External Cup for the Cane Creek 110 Series headset. Please contact us if you have any questions about which parts are correct for your headset.
Cane Creek 40 EC44 Conversion Headset Bottom
$43.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: EC44/40/H12/K • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.00mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 65g
Cane Creek 40 ZS44/EC44 Tapered Headset
$74.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS44/28.6|EC44/40 • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.0mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.0mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum
Chris King Inset 2
$165.00 - $170.00
The Inset headset offers Chris King's trademark quality and durability in a low-stack configuration sized for contemporary headtube dimensions. King's legendary made-in-house bearings still form the centerpiece of the Inset headsets, with precisely machined aluminum cups and headset caps available in all ten classic Chris King colors. The Inset 2 is compatible with tapered 1-1/8 - 1-1/2-inch forks and frames using a 44/56mm headtube.
Cane Creek AngleSet ZeroStack Headset (1 1/8-Inch Steerer)
$149.99
Cane Creek's AngleSet transforms your ride. It enables an effective head-tube angle adjustment of up to +/- 1-degree so you can fine-tune your mountain bike's front-end handling to best suit your riding style, local terrain and race course. Installation is straightforward because the AngleSet automatically adjust to fit different head tube lengths and angles. All AngleSet headsets have light, tough, and beautiful machined 7075 T6-aluminum cups with Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out.
Cane Creek 10 EC34 Headset
$44.00
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: EC34/28.6/H16/K|EC34/30 /H12/K • Top Type: EC - External Cup • Top Head Tube Inside Dia.: 33.95mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 16mm • Top Bearing Type: Black Oxide • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 33.95mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Polymer • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide • Material: 6061 aluminum • Weight: 88.29g
Cane Creek 40 Series ZeroStack Top Cover
$36.00
This is the Top Cover for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
FSA Aluminum Headset Spacers
$2.75
- Machined aluminum spacers for tuning stem height - Black spacers with white FSA graphic - 5mm and 10mm Spacers are sold individually - 1-1/8" Spacer Kit includes: (3) 3mm, (4) 5mm, (3) 10mm, (2) 20mm
Chris King InSet 7
$165.00 - $170.00
The Inset headset offers Chris King's trademark quality and durability in a low-stack configuration sized for contemporary headtube dimensions. King's legendary, made-in-house bearings still form the centerpiece of the Inset headsets, with precisely machined aluminum cups and headset caps available in all ten classic Chris King colors. The Inset 7 is compatible with tapered 1-1/8 - 1-1/2-inch forks and frames using a 44mm headtube.
Chris King Gripnut Headset (1-inch)
$150.00
Got a threaded steerer without spacers or brake hangers? Chris King's GripNut Headset is the choice for you. Ideal for heavy touring and riding over rough terrain, the GripNut features an extra threaded collet that locks the steerer in place, offering incredible holding power and adjustability. It’s also a welcome solution for forks with damaged or undersized threads. The additional collet makes it easy to install a fork that's had its steerer tube cut too short.
Chris King NoThreadSet Headset (1-1/8-inch)
$149.00 - $154.00
Chris King led the threadless headset revolution with their NoThreadSet. This iconic, incredibly durable piece of equipment embodies the limitless potential found in simple, high-quality design. Equally appropriate on your road or mountain bike, the NoThreadSet has been ridden to World Cup titles on the trail, and to victory at the Tour de France. Featuring precision-machined aluminum cups, King's own in-house stainless steel bearings, a stainless steel base plate, and all ten Chris King colors, each headset is a statement piece that will likely outlast your bike!
Chris King NoThreadSet Headset Sotto Voce (1-1/8-inch)
$149.00 - $154.00
Chris King led the threadless headset revolution with their NoThreadSet. This iconic, incredibly durable piece of equipment embodies the limitless potential found in simple, high-quality design. Equally appropriate on your road or mountain bike, the NoThreadSet has been ridden to World Cup titles on the trail and to victory at the Tour de France. Featuring precision-machined aluminum cups, King's own made-in-house stainless steel bearings, a stainless steel base plate, and all ten Chris King colors, each headset is a statement piece that will likely outlast your bike! The Sotto Voce models feature stealthy, toned down graphics that let you show your Chris King pride in a more subtle manner.
Odyssey R/F Series Pre-Load Bolt
$19.99
This custom 7075-T6 aluminum pre-load bolt design is included with every Odyssey fork. - Fits both a 6mm and 8mm allen key. - Front brake cable thru-way hole for removal without disconnecting brake hardware. - Designed with an easy-cut thread groove if you cut your fork’s steerer tube down.
Cane Creek 40 Series External Cup Headset
$62.00 - $90.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
Chris King Gripnut Headset Sotto Voce (1-inch)
$150.00
Got a threaded steerer without spacers or brake hangers? Chris King's GripNut Headset is the choice for you. Ideal for heavy touring and riding over rough terrain, the GripNut features an extra threaded collet that locks the steerer in place, offering incredible holding power and adjustability. It’s also a welcome solution for forks with damaged or undersized threads. The additional collet makes it easy to install a fork that's had its steerer tube cut too short.
Ritchey Logic Threadless Headset
$15.95 - $19.95
Ritchey's Logic Headset boasts machined aluminum cups for excellent longevity, light weight and super looks. A smaller upper angular cartridge bearing saves weight while a larger lower angular cartridge bearing boosts strength and durability.
Profile Design Threadless Size Converter
$16.99
Converts quill style forks to use threadless stems.
Cane Creek 110 EC49 Conversion Headset Bottom
$75.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. • Technical Description: EC49/30/H12/x • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 49.61mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Aluminum, Dual-Seal • Bottom Stack Height: 12mm • Bottom Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 aluminum • Weight: 83.01g
FSA Orbit IS Carbon
$69.99
Cane Creek compatible integrated style bearings fit directly into headtube. - Crown Race: 30 - S.H.I.S. Lower: IS41 - S.H.I.S. Upper: IS41 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
Cane Creek 110 ZS56 Conversion Headset Bottom
$75.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. Technical Description: ZS56/30/H4/x Bottom Type: ZS - ZeroStack Bottom Head Tube Inside Dia.: 55.95mm Crown Race Seat Dia.: 30.015mm Crown Race Type: Aluminum, Dual-Seal Bottom Stack Height: 4mm Bottom Bearing Type: Top-quality, sealed stainless steel bearings Material: 7075 aluminum Weight: 61.34g Part Number: BAA0156x
Cane Creek 110 EC44 Conversion Bottom
$75.00
Cane Creek's engineers were tasked with developing a no-compromise, best-in-class premium headset. With the introduction of their 110-Series, they did just that—choosing optimal materials, engineering the most effective internals and designing the best aesthetics available in a headset. - Technical Description: EC44/33/H12/x - Bottom Type: EC - External Cup - Bottom Head Tube Inside Dia.: 44.00mm - Crown Race Seat Dia.: 33.03mm - Crown Race Type: Aluminum, Dual-Seal - Bottom Stack Height: 12mm - Bottom Bearing Type: Top-quality, sealed stainless steel bearings - Material: 7075 T-6 aluminum - Weight: 58.29 grams
Cane Creek 110 EC34 Headset Top
$85.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 Series headsets. • Technical Description: EC34/28.6/H16/x • Top Type: EC - External Cup • Top Head Tube Inside Dia.: 34mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 16mm • Top Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 aluminum • Weight: 55.26g
FSA Orbit XL-II
$59.99
The FSA Orbit XL-II threadless headset features replaceable sealed cartridge bearings and an AL-7075 crown race. - Forged and CNC machined 6061/T6 aluminum cups - Patented alignment tip for increased durability and performance - TH Brand 36-degree Angular Contact sealed bearings - Laser etched aluminum top cap
Page 1 of 5 Next page