Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

Wahoo Blue SC Speed/Cadence Sensor (BT/ANT+)
$59.99
The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices. - No tangled wires on your bike to connect the sensor to your device. - Provides accurate speed data during your ride - Provides accurate cadence data during your ride - BlueSC comes with a rubber band mount and zip tie mount. - The Blue SC sensor will fit with most bikes and frame sizes
Wahoo RPM Cadence Sensor (BT/ANT+)
$39.99
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
CycleOps BlueGiga USB Dongle
$29.99
The BlueGiga dongle gives Rouvy, CycleOps' virtual training software, the ability to seamlessly connect to Bluetooth devices and sensors. The BlueGiga dongle contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including CycleOps smart indoor bicycle trainers and power meters made by the folks at PowerTap. Most importantly, the BlueGiga dongle is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth dongle for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.
CycleOps ANT+ Mini USB Stick
$38.99
Connect your desktop to CycleOps VirtualTraining.
Bontrager Blendr GoPro Mount
$19.99
Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr GoPro Mount for a clean, flush look that securely holds your GoPro in a centered location. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for GoPro camera - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Bontrager Blendr Garmin Low Mount
$19.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin Low Mount to add a Garmin GPS directly to the Blendr stem mount. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Bontrager DuoTrap Digital Speed/Cadence Sensor
$69.99
Bontrager's DuoTrap Digital Speed/Cadence Sensor pulls double duty for your ANT+ cycling computer. It wirelessly transmits speed and cadence data and fits directly into the chainstay of certain Trek bicycles for a clean look that installs in seconds.
Bontrager DuoTrap S Digital Sensor
$69.99
Connect ANT+ and Bluetooth Smart devices to all of the data available from the DuoTrap S sensor for your on-the-bike wireless needs. • ANT+ 2.4 GHz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Includes Bontrager wheel magnet, crank cadence band, and CR2032 battery • Works with Trek DuoTrap compatible bikes
Bontrager Insta-Mount
$19.99
Easily mount a cell phone and case directly to your bars for safe convenient access with the Insta-Mount and keep all of your favorite cycling and fitness apps safely accessible. • Mount your hard-shell smart phone case to your bike • Allows for easy access of phone on stem or handlebar • Includes Insta-Mount, universal mount, and application grid • Blendr-compatible
CycleOps ANT+ Micro USB Adapter
$19.99
The ANT+ Micro USB adapter allows on-the-go devices (OTG), such as your Android phone or tablet, to connect to an ANT+ USB stick. Android OTG compatible devices require ANT+ Radio Service and ANT+ USB Service to be installed from the Google Play store. These services allow the adapter to work correctly with an ANT+ USB stick.
Bontrager Computer Batteries
$5.99
Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor
Bontrager DuoTrap S Chainstay Cover - Madone 9 series
$9.99
Replacement chainstay cover for DuoTrap S Digital Sensor
Trek Madone SLR Blendr Duo Base
$19.99
Allows use of two Blendr mounts on a Trek Madone SLR Blendr add-on to the Madone SLR bar/stem Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Trek Madone SLR Aero Integrated handlebar - Add any accessory mount (sold separately) for an elegant, integrated look - Does not include mounting hardware
Bontrager Blendr Rally MIPS Bike Helmet Mount
$15.99
Easily integrated Designed specifically for specific Bontrager Rally MIPS mountain bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount light and camera accessories on top of your Bontrager Rally MIPS mountain bike helmet - Tested with accelerometer for intended breakaway point if involved in a crash
Bontrager Trip Mount for Blendr
$19.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Trip Computer Mount for a clean, flush look that securely holds your Bontrager Trip computer in a perfect position to see on the go. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Insta-Mount or Trip Computer - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Bontrager Blendr Kovee Pro 35 Stem Bases
$14.99 - $19.99
Blendr add-on to Kovee Pro 35 stems Clean up your Bontrager Kovee Pro 35 stem cockpit with Blendr Pro bases. - Blendr works with this simple formula: Stem + Base + Mount. Add accessory - Bases for use with the Kovee Pro 35mm stem - Add any accessory mount (sold separately) for an elegant, integrated look
Specialized Turbo Vado Stem w/Display & Light Mount
$65.00
Optimize your comfort and riding position on the Turbo Vado with this sleek stem. It's made from lightweight and durable 6061 aluminum, and it features both an integrated display and light mount. This way, you're able to dial in your fit without losing any of the readily accessible functionality or illumination that you love from the Vado.
Trek Madone SLR Blendr Mono Base
$19.99
Allows use of one Blendr mount on a Trek Madone SLR Blendr add-on to the Madone SLR bar/stem Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Trek Madone SLR Aero Integrated handlebar - Add any accessory mount (sold separately) for an elegant, integrated look
Bontrager Blendr Circuit MIPS Bike Helmet Mount Rear
$19.99
Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet - Tested with an accelerometer for intended breakaway point if involved in a crash
K-Edge Go Big On-Center Mount
$39.99
The new Go Big On-Center Mount the next generation in K-EDGE's industry leading GoPro style interface Camera Mounts. The new mounts provide easier installation with a stronger more secure platform for your action camera, available in 31.8 and 35mm options. On-Center give you a better framed image with the newer style cameras that have lenses centered on the camera, such as the GoPro Session and Garmin VIRB. - CNC Machined 6061 T6 Aluminum - Compatibility – fits 31.8mm and 35mm diameter bars; all mounting hardware included; works with all GoPro HERO Original, HERO2, HERO3, and GoPro Session Cameras. Shimano CM-1000, Garmin VIRB, and Garmin VIRB X. - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. - Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. *The NEW K-EDGE Handlebar Computer and Camera Mounts (1420, 1440, 1500, 1505, 1605, and 1905 series) are built in three parts. An integral part of our mounts are the connection where the arm and clamp are joined by two assembly bolts located on the underside of the mounts. THESE ASSEMBLY BOLTS ARE NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
K-Edge TT Mount for Garmin Computers
$64.99
The K-EDGE Garmin TT Mount is the most advanced Time Trial and Triathlon computer mount available. Featuring a twist-lock mechanism to lock your Garmin with confidence. The K-EDGE Garmin TT Mount’s aluminum design and its unique locking feature is by far the most advanced mount on the market. With traditional TT mounts for the Garmin computer, you have to either have enough room between the extensions to perform the ¼ turn “twist” or the computer has to be mounted above the extensions. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility – 22.2mm diameter TT Extensions - Supported Computers – Garmin Edge 20, 25, 200, 500, 510, 520*, 800, 1000, and Forerunner 310XT - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. *Garmin 520 is not compatible at this time.
Bontrager SpeedTrap Digital Speed Sensor
$34.99
Bontrager's SpeedTrap Digital Speed Sensor conveniently plugs into any Bontrager fork with SpeedTrap technology for the ultimate in convenience. And, it wirelessly transmits speed data to your ANT+ cycling computer.
Specialized SpeedZone Elite/Comp/Pro Stem Mount
$5.00
A stem mount for SpeedZone Elite, Comp, and Pro computers.
Bontrager Interchange ANT+ / Bluetooth Combo Sensor
$69.99
Get more data from your rides with the Bontrager Interchange digital combo speed and cadence sensor. This ANT+ 2.4 Ghz is designed to work with Bontrager Node wireless computers. It also works with many other ANT+ enabled devices. Sensor adjustment is easy with the adjustable arm. • ANT+ 2.4 Ghz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Independently adjustable arm for precise alignment of speed and cadence sensors • Includes Bontrager wheel magnet and crank cadence band • Includes silicone mounting strap to fit most chainstays and CR2032 battery • Visit www.thisisant.com/directory/ for compatible ANT+ devices • Visit www.bluetooth.com/pages/bluetooth-smart-devices.aspx for compatible Bluetooth devices
K-Edge Garmin XL Mount
$49.99 - $54.99
The Garmin XL Computer mount is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer, specifically designed to accommodate the EDGE 1000, 810 and 800, also compatible with the smaller Edge models like 520, 510, 500, in addition to the Forerunner and Touring models. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that K-Edge's replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. K-Edge provides free replacement inserts, as needed. Attributes (specs): - CNC Machined 6061 T6 Aluminum - Compatibility – 31.8mm and 35mm diameter handlebars - New clamp design is hinged for ease of installation - Supported Computers – Garmin Edge 1000, 810, 800. Also compatible with new Garmin Edge 520, Edge 20 and Edge 25 models, in addition to Forerunner and Touring models. - Combo Compatible – Add the Action Camera Adapter or the complete Combo Mount for the added benefit of using both a computer and GoPro style interface action camera or
SRAM RED eTap BlipBox
$330.00
SRAM's BlipBox is the control module that turns your triathlon or time trial machine into a wireless missile. Connected to SRAM RED eTap Blip remote shifters, the BlipBox manages the wireless shifting via AIREA, SRAM’s proprietary communication protocol, allowing immediate shifts from nearly any aero position. - BlipBox mount included - Replaces standard drop bar shift levers - Limitless aero configurations - Up to two positions per side - Fits a standard Garmin mount or the included mount
Garmin Quick Release Kit (Forerunner 935)
$29.99
Go from wrist to bike in seconds with your compatible Forerunner GPS running/triathlon watch. Includes quick release bracket, wrist bracket, bike mount, 2 pins, 2 screws, 6 bike mount o-rings and installation screwdrivers.
K-Edge K-EDGE Garmin Race Mount
$54.99
Superlight, machined aluminum, race mount for the ultimate Tour de France level performance. At 32 Grams the Race Mount is 33% lighter than the “standard” Garmin Mount. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Garmin 820, 520, 510, 500, 25, 20 - Fits Handlebars: 31.8MM - NOT GoPro Compatible - Anodized Color: Black, Red, Blue, Red/Blue - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded. * Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.
K-Edge K-EDGE Wahoo Pro Combo Mount
$64.99
The NEW K-EDGE Computer Mount for the NEW Wahoo Bolt is the most secure cycling computer mount available. Lock your Bolt in place with confidence. Aero design flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Wahoo Bolt, Wahoo Mini - Fits Handlebars: 31.8MM - Go Pro Action Camera type attachment for camera or light - Anodized Color: Black - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded. * Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. K-EDGE Combo Mount are NOT DESIGNED to hold a Cycliq Fly 12. (Cycliq Fly 12 & Fly12CE users should choose the K-EDGE K13-410, K13-420, K13-2450 GO BIG camera/light mounts.) Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.
K-Edge Wahoo ELEMNT Gravity Cap
$24.99
The K-EDGE Gravity Cap is a great computer mount option for those riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek computer mount. The Gravity Cap replaces your existing top cap and is ideal for Downhill, Enduro, Gravel, Touring, etc. - CNC Machined 6061-T6 Aluminum - Injection Molded Copolymer Interface - Compatibility: Wahoo ELEMNT - Lifetime Warranty - Weight: 18g - Anodized Colors: Black
Page 1 of 6 Next page