Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Seatposts

$219.99
Performance suspension seatposts designed to add comfort and compliance to any bike without adding unnecessary weight. With 35mm of travel, the eeSilk+ is a suspension seatpost designed to noticeably soften any gravel or mixed-surface road. These posts make great enhancements to gravel or mixed surface bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately - Travel: 35mm - Length: 387mm - Weight: 373g (27.2mm); 378g (31.6mm) - Max Rider Weight: 250lbs - Offset: 12mm - Minimum Extension: 80mm - Maximum Extension: 287mm
$309.00
- Built on the revered FOX Transfer platform, the Turbine R Dropper Post has infinite height adjustment with up to 175mm of drop Specs: - Seat Post Diameter: 30.9mm - Travel: 200mm - Cable Routing: Internal
$55.00
The Velo Orange Grand Cru seatpost is made from one piece of aluminum, internally ovalized to trim weight. The Grand Cru seatpost’s head is integral with the post – not pressed on – for great strength and weight savings. 0mm Setback: Zero-setback/offset posts are commonly used on mountain bikes and by some bikepackers. The Grand Cru zero setback post uses a one-bolt, ergonomic side-adjustment mechanism for both saddle rail clamping and fore-aft adjustment. 30.2mm Setback: For riders who prefer the comfort of leather saddles but have found proper saddle placement difficult due the short rails on leather saddles Velo Orange offers the Grand Cru Long Setback with an ample 30.2mm of setback. This model uses a two-bolt design.
$23.99 - $27.99
- Chromoly construction - Classic BMX Lay-back design - Material: Cro-Mo
$34.99
- PIVOTAL compatible - Polished stainless steel shaft - Durable and weather resistant finish - Reinforced shaft design for strength - Outer Diameter: 25.4mm - Length: 250mm - Setback: 0mm
$53.99
The directional butting of the Energy SBS SB20 seatpost’s 6066-aluminum shaft gives it thicker walls fore and aft for stiffness and thinner walls at the sides to cut weight. A forged and machined alloy head is bonded to the top of the shaft. - 3D forged and CNC machined AL6066 w/ alloy head - Directionally butted for low weight and additional strength - Chromoly hardware - Clamp Style: Standard Rails
$11.99
#901 7/8 top 10" x 1" - Seat Post Diameter: 13/16'' - Seat Post Length: 15.5'' - Offset: 0mm - Clamp Type: Post mount - Seat Post Material: Steel
$325.00
ENVE has found that a dropper seatpost can enhance the gravel experience and that 40mm of drop is just the right amount for most gravel riding and racing. A dropper post allows the rider to lower their center of gravity on descents which can result in greater control and therefore confidence. While designed primarily for gravel riders, the G Series Dropper allows XC riders and racers a lightweight dropper with just the right amount of drop. - 395 grams (can be trimmed for an additional 40 grams in weight savings) - Mechanical actuation - Internal Routing Only - 40mm of drop/travel - 350mm length (Min Post Height: 140mm seat post clamps saddle rail - 27.2mm diameter post (Includes shims for 30.9mm and 31.6mm posts) - Fully serviceable, no special tools required - Compatible with all cable actuated remote levers
$199.99
The patented Dual-Position Seatpost lets you ride a true aero position on a standard road bike, without sacrificing your normal road position. Along with the Quick-Release Aerobars it provides the benefits of a triathlon or time trial bike without the additional bike or price tag. The key to riding powerfully and comfortably is proper saddle position and since you can switch between road and aero positions on-the-fly while riding, you can always choose the best riding position for every part of your ride. Benefits: - Transform your current bike—switch from road to aero position on the bike you already own - Ride with ease—no more time and energy wasted switching from road bike to aero bike Details: - Linkage design lets you switch between road and aero positions seamlessly while riding - Choose the best position for every single climb, flat, or descent - Maintain proper leg extension in both road and aero positions - Saddle moves forward 50mm, corresponding to approximately 4 degrees of effective seat tube angle change - Aero road riding position optimized for proper handling on a road bike - Simple, durable two-bolt saddle clamp allows infinite saddle tilt adjustment and reliable clamping - 16mm rearward setback (road position) - Check technical specifications for compatibility
$38.99
Sunday Bikes pivotal seatpost.
$214.99
The EA70 AX dropper post joins our AX series of horizon-expanding drop bar gravel and adventure componentry. Features include a reliable cartridge design, internal routing and availability in two lengths - 350mm and 400mm. Our EA70 AX post brings 50mm of drop, allowing for fitment on everything from your wide-tired CX bike to modern gravel bikes. - Can be paired with drop bar optimized levers or drop bar compatible shifters - Cable attaches from either direction for compatibility with all dropper levers - Two lengths for better fitment on dropped top-tube gravel bike frame designs - Finish: Black Ano - Weight: 350mm - 400g - Head Offset:0mm - Drop: 50mm - Quill Sizes: 27.2mm Diameter - Material: EA70 Alloy
$29.90
- Strong and simple precision-forged aluminum seatpost - One-bolt clamp design allows for a wide range of saddle angles with infinite intermediate adjustability
$199.99
The newly redesigned EC90 SL ISA Seatpost takes our superlight unidirectional carbon and applies our patent pending Independent Saddle Adjustment, allowing for perfect fitment with independent seat angle and fore-aft movement. ISA allows you to refine your positioning without needing to undo your rail clamps for each minute tweak. Saddle angle is then locked in place so you have the confidence your saddle will stay put after you find your fit. Coming in at 195g, the new EC90 SL ensures a secure fit and a super light upgrade for your dream build. - EC90 Carbon mast with full carbon head - ISA - Patent pending Independent Saddle Adjustment - Taperwall technology - Finish: Matte Black UD Carbon - Length: 350mm with 80mm Min Insert - Material: EC90 Carbon
$269.99
- Longer Drop – The Tellis is now available in 200mm drop so riders can benefit from the ability to further drop their saddle. This allows for more free movement on the bike when the trails get steep, fast or technical - The same proven & trusted design, now in a longer 200mm drop length - Internal Routed, Infinitely Adjustable Design - Simplistic—Fully Sealed Alloy Cage / Stainless Tip Cartridge System - Durable 3D Forged Head—With 7075-T6 Forged Clamp - Intelligent Keyway System—Ensures Minimal Play - Easiest Installation—Cable Head Attaches At Base - Cold Weather Approved—Tested Down To -20C - Featherlight Lever Thumb Actuation—Industry Leading - 282mm insertion length - 1x Lever included—With Premium Jagwire Lex Slick Housing, Stainless Cable and Hardware
$155.12
NCX Suspension Seatpost - Alloy construction - Coil spring with preload adjuster - Brass pivot bushings
$199.00
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel
$199.99
The latest generation Thudbuster LT is superior to its predecessor in every way.  Building on Thudbuster's proven parallel linkage technology we have completely re-designed the seatpost for increased durability, additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design. By improving on this already legendary design, we're confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made. - Travel: 90mm - Weight: 750g (31.6mm) - Max Rider Weight: 250lbs
$96.00
The new SL-K SBS SB0 seatpost is lighter and stiffer than ever. Using a UD carbon shaft with a bonded alloy head and a sophisticated SBS clamp design, we can achieve what we believe is the finest SL-K seatpost yet. Available with a polymer Di2 battery holder. - UD carbon shaft with bonded alloy head - Forged alloy "SBS" 2-bolt head - Chromoly hardware - 20mm setback - Fits 7mm standard rails and 7x9mm oval rails - 221 grams
$16.99
Stolen Thermalite Pivotal Seatpost. Thermalite is proprietary material made with Nylon 66 base w/ 50% longer glass fiber infusion. Thermalite posts are 30% lighter than the current Alloy posts on the market. - Dupont Nylon 66 with 50% longer glass fiber infusion - 1/3 lighter than any alloy post on the market - Compatible with all Pivotal seats - Weight: 2.8oz.
$216.20
The K-Force Light SB25 post's one-piece carbon fiber shaft and head are topped off with a forged alloy Minimal Top Clamp, giving a full range of adjustment and secure saddle mounting at a very low weight. There's also the option of mounting a Shimano Di2 battery in the bottom of the post. - Forged alloy Minimal Top Clamp (MTC) - One-piece continuous carbon fiber construction - Fit 7mm standard rails and 7x9mm oval rails - Weight: 204 grams
$29.99
It’s a traditional straight up pivotal design with a 200mm length.
$25.99
Odyssey is proud to offer their new tripod post. It allows for the two most popular seat angles amongst riders and it’s clean, light and easy to install. SPECS - 25.4mm diameter - 6061-T6 Aluminium, CNC machined
$633.00
The new Reverb AXS XPLR dropper post delivers more control, confidence, and fun on gravel roads everywhere. Getting the saddle out of the way means more room to move, saving you from awkward maneuvering and sketchy descents. We created an all-new design complete with lightweight air-only internals featuring built-in compliance we call ActiveRide. It's like travel for your saddle. Enabled by SRAM AXS technology, Reverb AXS XPLR is part of the ultimate personalized cockpit. - New 27.2mm Reverb AXS XPLR delivers more control, confidence, and fun for gravel - ActiveRide—Air only internals provide a fully rigid top-out position. With the touch of your AXS controller, you've got built-in compliance to ensure comfort and control over the roughest sections of gravel - Two travel options to choose—50mm or 75mm - Saddle clamp options compatible with 7x10 oval carbon rails. - Seat post length includes 400mm and 350mm (50mm drop only) - AXS Technology allows rider customization via the AXS Mobile App - AXS handlebar controls (drop or flat bar) - Shared battery with all other SRAM AXS enabled components - System is completely waterproof and dustproof to IP69K—take it anywhere - SRAM AXS battery and charger included SPECIFICATIONS: - TRAVEL: 50mm, 75mm - POST DIAMETER: 27.2mm - POST LENGTH: 350mm, 400mm - REMOTE: AXS Controller Sold Separately - SADDLE RAIL COMPATIBILITY: Round/Oval (7x9 & 7x10), Round/Oval (7x9) - WEIGHT (G): 562 - WEIGHT BASED ON: 75mm Travel 400mm Length W/O battery - Battery 25g
$12.99
#901 7/8 top 10" x 1" - Seat Post Diameter: 25.4mm - Seat Post Length: 15'' - Offset: 0mm - Clamp Type: Post mount - Seat Post Material: Steel
$129.99
- Carbon fiber mast with micro clamp aluminum head - One bolt adjusts tilt and fore-aft saddle position for micro tuning which allows for superior comfort and performance (no-offset clamp) - Unsurpassed strength to weight ratio - Specific to I-Beam saddle
$73.95
Ritchey's WCS 1-Bolt Seatmast Topper makes saddle installation and adjustment super easy. It's constructed of forged aluminum for strength and the single bolt clamp makes it very simple to find your perfect saddle position. Furthering the ideal fit, the WCS Seatmast Topper comes in 50mm and 70mm lengths and different offsets.
$169.95
The newly redesigned Trail post offers no-slip saddle engagement and high adjustability by securing the rails with fore and aft bolts. Whether your hitting rough singletrack or remounting in a hurry, this ensures the saddle stays exactly where you want it. - Carbon Construction with alloy clamps
$89.95
The redesigned Zero post offers no-slip saddle engagement and high adjustability by securing the rails with fore and aft bolts. Whether you're hitting rough singletrack or remounting in a hurry, this ensures the saddle stays exactly where you want it. - Material: 2014 alloy - Total length: 400mm (including 100mm of minimum insert) - Saddle clamp: 2-bolt fore/aft - Saddle clamp torque: 7Nm (max) - Seat collar torque: not specified - follow frame/seat binder specification - Weight: 240g (27.2x400mm)
$259.95
The Ritchey two-bolt post, reinvented. It's now lighter, more compliant, and more versatile than ever. Patented LINK clamp works with all standard saddle rail designs as well as Ritchey Vector Evo and Selle Italia MonoLink saddles with separate adapter. LINK Carbon Posts use FlexLogic carbon layup developed for Pro Tour team bikes from Stevens, Canyon, and Scott and is 15% more vertically compliant with no loss of lateral or torsional stiffness. 15mm of offset and a reversible clamp allows for an additional 10mm of fore/aft saddle adjustment. - Monocoque Carbon Construction - Offset: 15mm - Reversible clamp allows for an additional 10mm of fore-aft saddle adjustment - Matte UD finish - 181g (27.2x300)