Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories

$18.99
New pads help your helmet fit best and smell fresh
Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new.
- Original equipment replacement fit pads for your Bontrager Specter WaveCel helmet
- Helmet fit pads should be replaced once a year to maintain fit and hygiene

$4.99
- Made in the USA
- Enables Take a Look Original Eyeglass Mirror to fit helmets
- Does not work with Take a Look Compact Eyeglass Mirror

$14.99
Replacement visors keep your lids fresh
Helmet visors work hard to get the sun out of your eyes and keep you looking good. No matter what happens, these original replacements will get them working like new.
- Works perfectly with your Bontrager Blaze WaveCel helmet
- Original equipment replacement visor

$19.99
Easily integrated
Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras.
- Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet.
- Tested with an accelerometer for intended breakaway point if involved in a crash

$2.99
Bontrager's LockDown strap dividers are essential for a great fitting, secure helmet. No matter what happens, these original replacements will get them working like new.
Key features:
- Original replacement strap dividers for your Bontrager helmet
- Compatible with all Bontrager helmets equipped with LockDown Straps

$26.99
New pads help your helmet fit best and smell fresh
Let's face it—we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new.
- Original equipment replacement fit pads for your Bontrager Blaze WaveCel helmet
- NoSweat keeps sweat out of eyes through channeled pads for constant clarity
- Helmet fit pads should be replaced once a year to maintain fit and hygiene

$24.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
- COMPATIBILITY: Z1 MIPS, Z1
- ATTACHMENT: Z1 helmet
- WEIGHT: 45g
- MATERIAL: Polycarbonate

$29.99
Replacement fit systems keep you comfy and secure
Fit systems work hard to keep your helmets secure and to maximize safety. No matter what happens, these original replacements will get them working like new
- Original equipment replacement Boa System for your Bontrager WaveCel helmet
- Not compatible with non-WaveCel helmets
- Full-length fit system designed for use with Medium and Large sized helmets
- Short length fit system designed to optimize the fit of Small sized helmets

$34.99
When chilly, soggy weather rolls through, Garneau's H2 Helmet Cover keeps you both warm and dry. It's made from a polyurethane-coated spandex that's water-resistant. The sealed seams and a snug stretch band that fits easily over your helmet also keep water from seeping in. Plus, when the sun's not shining, the high-visibility yellow color and reflective accents will help make you visible to others.
Technical Details:
- Fabric : Polyurethane-coated Carbon WR spandex
- Seams: Sealed seams: Keep you dry
- Visibility Features: Reflective accent

$10.99
Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new.
- Original equipment replacement fit pads for your Bontrager Lithos or Rally helmet
- Helmet fit pads should be replaced once a year to maintain fit and hygiene

$3.99
Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new.
New pads can also help you dial in your perfect fit - keeping you comfortable and looking forward to the next ride.
- Original equipment replacement fit pads for your Bontrager Dipper helmet
- Helmet fit pads should be replaced once a year to maintain fit and hygiene

$5.99
These covers are key to keeping your Ballista helmet aero and cool. No matter what happens, these original replacements will get them working and looking like new.
- Works perfectly with your Bontrager Ballista helmet
- Original equipment replacement vent covers

$22.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
Sizing:
- Small = 52 – 56cm
- Medium = 55 – 59cm
- Large = 58 – 61cm

$19.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
- COMPATIBILITY: Blade+ MIPS, Blade+, Blade, Blade MIPS
- ATTACHMENT: Blade or Blade+ helmet
- WEIGHT: 45g
- MATERIAL: Polycarbonate

$9.99
Camera mount for Jackal and Impala helmets.
- COMPATIBILITY: Jackal MIPS, Jackal, Impala MIPS, Impala
- ATTACHMENT: Velcro
- WEIGHT: 13g
- MATERIAL: Nylon

$9.99
Freshen up the interior of your helmet with a new pad set!
Replacement padset for Lazer Urbanize MIPS helmets. Set includes two pads - one front pad and one top center pad
COMPATIBILITY
- Urbanize MIPS
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam

$14.99
Visor for Coyote helmet
COMPATIBILITY
- Coyote MIPS
- Coyote
- ATTACHMENT: Direct Mount
- WEIGHT: 45g
- MATERIAL: Nylon

$35.00
Strap dividers for thick Lazer helmet straps
COMPATIBILITY
- Blade+ MIPS
- Blade+
- Tonic MIPS
- Tonic
- Coyote MIPS
- Coyote
- Chiru
- Next+
- Cameleon MIPS
- Compact DLX MIPS
- Compact DLX
- Compact
- J1
- Gekko MIPS
- Gekko
- Lil'Gekko MIPS
- Lil'Gekko
- ATTACHMENT: strap
- MATERIAL: Nylon

$10.99
Let's face it - we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new.
New pads can also help you dial in the perfect fit - keeping you comfortable and looking forward to the next ride.
Key features
- Original equipment replacement fit pads for your Bontrager Specter helmet
- Helmet fit pads should be replaced once a year to maintain fit and hygiene

$26.99
New pads help your helmet fit best and smell fresh
Let's face it—we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new.
- Original equipment replacement fit pads for your Bontrager XXX WaveCel helmet
- NoSweat keeps sweat out of eyes through channeled pads for constant clarity
- Helmet fit pads should be replaced once a year to maintain fit and hygiene

$20.99
Add the safety of visibility to your helmet and light up the trail, road, or commute with help from the Bontrager Helmet Mount. Easily attaches a light to most helmets.
- Works with all Bontrager Ion and Flare lights

$65.00
You need to get out on your bike even in terrible weather. Fitting in an early commute or a mid-winter ride is easier when you're warm, comfortable, and visible. Keeping your head warm in bad weather can be the best way to fend off the elements.
- GORE-TEX Product: durably waterproof, windproof and extremely breathable
- Reflective band
- Elastic hem
- Reflective logo
- Durably waterproof
- Extremely breathable
- All weather conditions
- Engineered for Cycling
- Weight: 0.8 ounces

$10.00
- Replacement X-Static pads for Lazer's Wasp Air Helmet
- X-Static pads are an anti-microbial, self-cleaning pad system

$14.99
Helmet visors work hard to get the sun out of your eyes and keep you looking good. No matter what happens, these original replacements will get them working like new.
- Works perfectly with your Bontrager Solstice helmets including Youth models
- Original equipment replacement visor

$31.99
Key features
- Original equipment replacement Boa System for your Bontrager helmet
- Compatible with all Boa-equipped Bontrager helmets, except Velocis MIPS
- Can also be used to upgrade your Headmaster-equipped Bontrager helmet to the Boa System

$11.99
A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions.
The ATS LED Taillight only fits Lazer helmets equipped with the Advanced Turnfit System.
- COMPATIBILITY: Bullet 2.0, Century MIPS, Century, Wasp Air Tri, Victor, Impala MIPS, Impala, Urbanize MIPS
- BATTERY TYPE: LR41 button battery
- RUN TIME: 37 hours
- LUMENS: 4 lumens
- ATTACHMENT: ATS dial
- WEIGHT: 15g
- MATERIAL: Nylon

$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below.
Replacement padset for Lazer Cameleon MIPS helmet. Set includes four pads - front pad, two top side pads and top center pad.
- COMPATIBILITY: Cameleon MIPS
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam

$18.99
New pads help your helmet fit best and smell fresh
Let's face it—we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new.
- Original equipment replacement fit pads for your Bontrager Blaze WaveCel helmet
- Helmet fit pads should be replaced once a year to maintain fit and hygiene

$18.99
New pads help your helmet fit best and smell fresh
Let's face it—we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new.
- Original equipment replacement fit pads for your Bontrager XXX WaveCel helmet
- Helmet fit pads should be replaced once a year to maintain fit and hygiene
Page 1 of 2
Next page