Clothing

Essential Wet-Weather MTB Jacket Designed to keep you dry through the worst trail conditions, the Ranger 3L Water Jacket is all about keeping as much of the wet away from your body as possible while you ride. To ensure it does that, it is constructed with advanced weather protection features, such as fully taped seams and waterproof zippers built into the 10K/10K, 3L waterproof fabric. And it's not just about keeping your body dry either, this jacket comes with water-resistant pockets so any valuables you've stashed in them stays dry as you shred. Features - Advanced weather protection features fully-taped seams and waterproof zippers - 10,000 mm / 10,000g, 3-Layer, breathable, waterproof fabric - Front hand pockets with separate compartments to keep your stuff in place while you ride - Drawcord on lower hem for a close fit - Water-resistant pockets to keep your valuables dry - Laser-cut, billowed pockets to keep your cargo comfortable and away from your body - Water-resistant YKK front zipper - Length (HPS): 29": size Large Construction - Body: 10,000mm / 10,000g waterproof/breathability - 100% polyester, 3-layer fabric

Waterproof, wet weather mountain bike jacket Designed to keep you dry through the worst trail conditions, the Ranger 3L Water Jacket is all about keeping as much of the wet away from your body as possible while you ride. To ensure it does that, it is constructed with advanced weather protection features, such as fully taped seams and waterproof zippers built into the 10K/10K, 3L waterproof fabric. And it's not just about keeping your body dry either, this jacket comes with water-resistant pockets so any valuables you've stashed in them stays dry as you shred. - Fully seam-sealed waterproof/breathable fabric to keep you dry on the trail. - Advanced weather protection for a wide range of weather conditions - Lightweight 10,000mm/3,000gm 2.5-Layer waterproof breathable main body fabric - DWR finish sheds moisture, dirt, and debris - 2 zippered front hand pockets - Drawcord cinching at hem and elastic cuff provide customized fit - Helmet compatible hood fits over most helmets - Length (HPS): front 25.5", size small - Face: 94% polyester, 6% elastane - Back: 100% polyester

Even on a good day, you're likely to get splattered with spray, so make sure you're kitted out for it. The MT500 Spray Baggy Short II is an innovative and hard-wearing hybrid that combines a waterproof short with a conventional MTB baggy. The front uses a lightweight, 4-way stretch fabric with DWR finish—an eco-friendly treatment that provides a reliable water-repellent layer. The rear comprises a waterproof, 3 layer seam-taped panel for effective spray protection. There are front zipped hand pockets as well as zipped thigh vents with mesh inserts for temperature regulation. The waistband has integrated stretch, Velcro side waist adjusters, as well as belt loops. - Lightweight, durable, 4-way stretch front panels with DWR finish - Waterproof, 3 layer seam taped rear panels for spray protection - Stretch, wicking waistband with Velcro side waist adjusters - Zipped thigh vents with mesh inserts - Zipped hand pockets - Clickfast liner compatible - 90-day Satisfaction Guarantee

Design Philosophy: -Protection, it’s in our DNA. An expanded line up of protectors ensures every type of mountain biker is catered for. We work with the best riders to develop our products including the first family of DH, the Athertons and Scottish legend Danny MacAskill. The MT500 Lite knee protectors provide fully certified protection, in lightweight yet durable fabrics for all day pedaling comfort. D3O LP1 Insert: -The LP1 Protector used in the MT500 Lite Knee Pad is the most advanced, breathable protection made by D3O. The highly vented geometry increases the insert's breathability by 45% whilst retaining EN1621-1:2012 level 1 certification. Its lightweight, low-profile design and soft, flexible properties make this an unobtrusive and comfortable high performance protector. Key Benefits: - Highly abrasion resistant impact panels - D3O insert provides lightweight, breathable, shock absorbing protection - Certified to meet CE EN 1621/1 standards - Side PU foam padding provides further impact protection - Jacquard loop system provides secure comfort fit

The Launch Pro D3O Elbow Guards build on the legendary performance of Fox's existing guards and elevate the performance to new heights. Designed with input from Fox's elite level race team, these elbow guards utilize D30 - the worldwide leader in impact reducing materials - and combine that technology with a removable hard cap for bulletproof durability and all mountain performance. The D3O CE certified build allows the elbow guard to stay flexible for ease of movement and comfort, but upon impact, they instantly harden to provide a hard shell-like protection. The Launch Pro D3O Elbow Guards have a breathable, moisture wicking construction, so they remain comfortable all day long. - Enhanced breathability through perforated, non-toxic, hypoallergenic Ariaprene neoprene - Anatomically designed panels provide superior on-bike comfort - Moisture wicking back fabric keeps you cool and dry - Removable/replaceable hardshell front cap to reduce snagging - D3O CE certified insert for impact protection

Bringing style and versatility to the trails and the city. Design Philosophy The Women's Hummvee Waterproof Hooded Jacket features a casual melange waterproof, breathable, 2-layer fabric and mesh dropped liner to bring performance, comfort, and style that excels on the trail, in the city, and everywhere in between. If you want one jacket that does it all and more and is built upon the legendary functionality and durability of Endura's Humvee range, look no further. Fabric This jacket utilizes a 2-layer fabric that stops water from getting in and lets sweat out and a dropped mesh liner that provides next-to-skin comfort. Additional ventilation is provided by zipped underarm vents ensuring that you can maintain a comfortable temperature whatever the intensity of activity. Key Benefits: - Waterproof, breathable 2-Layer fabric in a fully seam-sealed construction with a fast-wicking dropped mesh liner for comfort - Ventilation from zipped underarm vents - Hood with concealed adjustment - Full-length storm flap behind front zip - Zipped chest and front handwarmer pockets - Adjustable hem and Velcro cuffs - Reflective trim

When you need comfort and performance at a tremendous value, look no further than our RBX Jersey. It's made from our VaporRize knit fabrics that place a focus on balancing durability and moisture management, which means that you get a jersey that'll be long lasting and quite comfortable over the long haul. Adding to the comfort, you'll find that we included a full-length front zipper for on-the-fly venting, as well as our Regular Fit. This cut hits the sweet spot in-between race and classic, so it's perfect for long, all-out rides, yet it's roomy enough to avoid any pinching or the feeling of being constricted in your movements. There are also three rear expansion pockets to house all of your small ride essentials. - Soft knit fabric pairs with breathable mesh to tackle moisture management, while remaining soft against the skin and supportive in all the right places. - Three standard pockets provide ample space to securely house all of your ride essentials and electronics. - Full-length front zipper gives you the power to manage ventilation under hard efforts or chilly descents. - UPF 30+ rating protects your skin from harmful ultraviolet rays. - Regular Fit is generous, so it fits close to the body without being constricting.

Long hours in the saddle put a ton of stress on your jerseys. But we think it's a misconception that you can't provide race-ready performance in a package that's built to take some abuse. And for this reason, we created our SL Jersey. For its construction, we used our venerable VaporRize knit fabrics that provide the optimal blend of moisture management and durability. Not only this, but the materials used have an incredibly soft hand against the skin for all-day comfort on the road. Of course, you'll also find convenient features like three rear pockets and a full-length front zipper, but you'll also get our Slim Fit that makes the SL Jersey feel painted on. This detail ensures that the jersey predictably follows all of your movements in the saddle, without leaving any material bunched or flapping in the wind. - Soft knit fabric pairs with breathable mesh to tackle moisture management, while remaining soft against the skin and supportive in all the right places. - Three standard pockets provide ample space to securely house all of your ride essentials and electronics. - Full-length front zipper gives you the power to manage ventilation under hard efforts or chilly descents. - UPF 30+ rating protects your skin from harmful ultraviolet rays. Slim Fit provides a precise, second skin level of fit that's ideal for hard days out, aggressive training, or top-level racing.

The new Trail-Series Thermal Jersey utilizes Polartec Power Grid fabric to keep you warm and comfy, all while being exceptionally breathable. It's the perfect option for cool days on the trail, or even as a long sleeve when you're grabbing a post-ride beverage. - 4-way stretch fabrication allows for a comfortable fit in all areas of the garment. - Fabric Content: 91% Polyester, 9% Spandex Knit. - Fabric outer surface is engineered to disperse moisture for fast evaporation. - Front Kangaroo Pocket with hidden secure zipper holds your keys or credit cards right to your body. - Hydrophilic next-to-skin surface absorbs sweat and transfers it to the outside of your garment. - Lightweight garment keeps you extremely warm while preventing excess weight and bulkiness on your body. - Polartec Power Grid generates targeted touchpoints to manage moisture while grid design creates improved breathability. - Relaxed Mountain Bike Fit is the perfect blend of generous and tailored, providing a loose, comfortable fit for the trail.

The new Trail-Series Thermal Jersey utilizes Polartec Power Grid fabric to keep you warm and comfy, all while being exceptionally breathable. It's the perfect option for cool days on the trail, or even as a long sleeve when you're grabbing a post-ride beverage. - 4-way stretch fabrication allows for a comfortable fit in all areas of the garment. - Fabric Content: 91% Polyester, 9% Spandex Knit. - Fabric outer surface is engineered to disperse moisture for fast evaporation. - Front Kangaroo Pocket with hidden secure zipper holds your keys or credit cards right to your body. - Hydrophilic next-to-skin surface absorbs sweat and transfers it to the outside of your garment. - Lightweight garment keeps you extremely warm while preventing excess weight and bulkiness on your body. - Polartec Power Grid generates targeted touchpoints to manage moisture while grid design creates improved breathability. - Relaxed Mountain Bike Fit is the perfect blend of generous and tailored, providing a loose, comfortable fit for the trail.

New 2022 Raid Knee Guard Updated for 2022 with a long list of revised features, Raid is the go-to knee guard for the world’s fastest World Cup Downhill athletes including Vali Höll, Troy Brosnan and Luca Shaw just to name a few. Built for the rowdiest trails with added D3O – CE Level 2 protection, that gives you the best of both worlds - comfortable when pedaling and crucial impact areas that hardens on impact. It’s an easy choice when tackling the trickiest trails. - CE1621-1 Level 2 D30 Impact Liner - Fit-Lock Rear Compression Band - Flex Gusset Designed For Articulation - Abrasion Resistant Kneecap & Side Pads - Strategically Placed Side Impact Protection - Breathable, Moisture-Wicking Rear Panel And Liner

Our Bluegrass Solid knee pads are designed for full protection against the most common impacts. We added larger side pads to provide a greater range of coverage and a safer ride. - Two-layer protection - Certification CE 1621-1:2012 Level 1 - Extended sleeve - Silicon grippers - Top and bottom straps - Breathable Air Mesh fabric - Side soft pads

Updated version of the iconic Endura spray baggy—innovative and hard—wearing hybrid that combines the best bits of a waterproof and stretch MTB short - Lightweight durable 4-way stretch front panels with DWR finish - PFC-Free non-toxic durable water repellent finish - Waterproof 3 layer seam taped rear panels for spray protection - Stretch wicking waistband with Velcro side waist adjusters - Zipped hand pockets - Clickfast liner compatible - Like the mutant offspring of a waterproof and standard baggy short - 90 day Satisfaction Guarantee

The Women's MT500 Spray Short is designed to excel in damp, variable conditions. A waterproof, taped seat panel sheds off the worst of the water kicked up from your back wheel while unrestricted movement. Comfort is maintained by using a durable stretch nylon fabric for the rest of the short. These shorts have been designed with knee pads in mind, with the leg length optimized to keep the pad-gap police at bay. - Lightweight, durable, 4-way stretch front panels with DWR finish - Waterproof, 3-layer seam taped rear panels for spray protection - Stretch, wicking waistband with Velcro side waist adjuster - Zipped hand pockets - Clickfast liner compatible - 90-day Satisfaction Guarantee

Mother Nature is always in flux, but mankind is both smart and adaptable. In other words, whenever she changes her mood, we always have the right tool for the job. And when that job is protecting against blustery, cold conditions, the right tool is our Deflect Comp Shoe Covers. Compared to our Element line of shoe covers, Deflect places more of a focus on wind resistance, so you'll find a stretchable construction with lightweight insulating properties. And to make getting in and out of the covers easy, we also included a rear zipper. - Deflect fabrics feature a good amount of stretch and a brushed back interior to ensure a light level of insulation. - Abrasion-resistant bottom and toe panels increase the lifespan. - A universal cleat opening makes these covers compatible with either road or mountain shoes. - Reflective elements - Rear Velcro closure

Ultra Slim and Soft Impact Gel Protector Minimalistic, comfortable, ergonomic fit, and uncompromised CE-certified impact protection. The Airflex Knee Guard Pro is an engineering masterpiece! The lightweight construction and silicone grip panels made it possible to delete the thigh strap and still keep that famous Leatt non-slip fit. This knee guard meets all of our design criteria. By changing over to 3D-shaped impact gel, we achieved the minimalistic slim shape while still keeping the CE Impact protection. - Super slim and lightweight AirFlex impact gel protection - Side and upper knee impact protection - Pre-curved design for optimal fit and function - Silicone-printed, cupped knee grip - Premium comfort using MoistureCool and AirMesh wicking fabrics - All protection materials perforated for ventilation - Silicone-printed, non-slip cuffs - Total Leatt protection score of 15 points - CE tested and certified as impact protection: Knee EN1621-1 - Weight: from 300g (0.66lbs) pair

Adventure-ready gravel bibshorts with additional cargo-carrying capacity - Super-stretch woven main body fabrics for improved durability - Double-layered side leg panels to reduce potential gravel rash from unexpected spills - Mesh cargo pockets on the thighs and additional mesh storage on the side waist - Lumbar support panels and power straps derived from Endura's class-beating PRO SL Bibshort - 600 Series pad II, utilizing Endura's proprietary computer-cut‚ Continuously Variable Profile (CVP) stretch technology and gel inserts for superior vibration damping and support - Silicone gripper detail to help prevent an over-short riding down or your jersey riding up

Functionally, the Lilium mountain bike shorts has 3 zippered pockets, strategic laser perforated zones and a zipper fly and snap closure. For the mid-ride pics, the Lilium has a phone specific pocket that will hold the phone securely. The performance oriented cut is constructed of a 4-way stretch woven fabric and feature a comfort waist adjustment system. - Women's Ergo Endurance Fit - Blue Sign Certified 4-Way Stretch Woven - UPF 30+ - Comfort Waist Adjustment System - Optimal 3 Zippered Pockets

Designed with valuable feedback from the 3-time EWS winner himself, the Sam Hill signature knee pads are the ultimate MTB knee pads for gravity riding, whatever your discipline. Light enough to be worn all day long, the Sam Hill knee pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin. CE EN1621-1:2012 Level 2. - High length compression design to prevent pad from slipping - Extra padding surrounding main knee cap for increased protection and support - Silicone printed gripper on inside of cuffs - Silicone printed logo on top and bottom outside cuffs to grip silicone on to shorts - Mesh back for increased airflow - Certified CE EN 1621-1:2012 Level 2 - Pre-curved fit for ultimate comfort - Weight 340g (size L)

When it comes time to hit a track wide open, you simply can't do any better than our Demo Pro Pants. - VaporRize woven fabrics are treated to be water-repellant, while remaining durable, stretchy, and lightweight for peace of mind on the mountain. - Three zippered pockets provide ample, secure room to store everything that you need while you're out riding. - Laser perforated venting adds sophisticated points of ventilation that don't detract from the durability or performance of the shorts. - Designed to retain a loose and open fit while using pads and armor. - Side waist adjustment tabs ensure that the fit of the shorts is easily customizable and dialed-in, even when your pockets are loaded. - Tapered leg helps to prevent anything getting caught in the chain. - Deflect UV 50+ protects your skin from harmful ultraviolet rays.

Waterproof Winter Warmer - Durable outer fabric - Thinsulate insulation for winter riding - Seam-sealed internal breathable waterproof membrane - Wicking inner brushed tricot to move sweat and moisture from skin - Silicone print palm and finger tips for grip - Lightly padded gel palm - Full finger terry sweat wipe - Elasticated wrist with Velcro cuff adjuster - E-Swipe touchscreen compatible finger

Winter Warmth for Sub Zero Rides Key Benefits: - Windproof front and sleeve panels with DWR finish - PFC-Free, non-toxic durable water repellent finish - Stretch, insulating Roubaix upper back and side panels - Waterproof rear pocket and tail for spray protection - Full front zipper with sprung puller - Triple open rear pockets with zipped security pocket - Reflective trims

Tried and tested, this short has outlived many a bike and we have worked hard to ensure that its durability will not disappoint. They incorporate a tough nylon and are double stitched in critical areas, making them nearly indestructible. There are no less than 6 pockets on this short: 2 rear Velcro pockets, 2 zipped side-pockets, and 2 smaller thigh-pockets for your change and keys. This product comes complete with an Endura Clickfast detachable liner. Just pull them on and you are ready to roll. The liner is made with a lightweight stretch mesh, elastic waistband, and silicon hem grippers.The seat pad is our very own 200 series pad for wicking comfort throughout the day. They can quickly be clicked in and out with our Clickfast attachment system, and are interchangeable with other MTB cycle shorts in our range. - Durable Nylon mini-ripstop fabric with DWR - Includes Clickfast detachable liner with 200 series - Zipped thigh vents with mesh inserts - Zipped hand pockets, cargo pockets and large rear map pockets - Durable, seamless seat panel - Rear elasticated waistband and adjustable belt - High Mobility Multi-use Versatility—HuMMVee

Whether your preference is for wearing bib tights over your favorite pair of bib shorts, or you're looking for something with cross-functional versatility this winter, our Element Tights with No Chamois will provide you with protection and comfort all winter long. To start, they're made from one of the most protective and warming materials in the business—our Element Soft Shell. This material is extremely wind- and water-resistant, and it's also highly efficient at wicking moisture away from the skin, while remaining soft against the skin and quite breathable. The fabric also possesses the perfect amount of stretch, which complements the articulated cycling cut of the bib tights. Essentially, this all adds up to a complete freedom of movement throughout the motions of cycling, and this equates to the elimination of any rubbing, pinching, or chafing. And to ease entry and exit of the bib tights, we've also included an eight-inch ankle zipper. The bib tights have been purposefully constructed without a chamois. The reason for this boils down to both preference and versatility. For cycling, you're able to layer them over your favorite pair of bib shorts for added warmth and predictable comfort. And for other winter sports like Nordic skiing or trail running, you'll find the close, warming fit of these tights to be the perfect match. - Element Soft Shell is a knit fabric with remarkable insulating properties, as well as being wind- and water-resistant and highly breathable. We've also included insulating Therminal panels in selective locations of the bib tights to further the overall warmth. - Articulated cycling fit is designed to complement the body throughout the positions and movements of cycling, which eliminates any unwanted pinching, rubbing, or chafing. - Ankle gaiter creates a tight seal with either shoes or covers, so cold air won't creep up the leg while you're riding. - Reflective elements increase your visibility to motorists in low-light conditions. - DeflectUV 50+ protects the skin against harmful UV rays.

Our Trail Shorts are an essential for any trail rider's wardrobe. They're lightweight, durable, and downright comfortable—everything you need for an afternoon shred. Plus, they come with a removable liner with our Mountain Body Geometry chamois that your posterior will be thankful for. - 13.5" inseam (size 34 waist) fall low around the knee for a roomy fit that leaves plenty of room for pads. - Deflect UV 50+ protects your skin from harmful ultraviolet rays. - Fabric Content: SHELL: 100% Polyester; LINER: 85% Polyester, 15% Spandex - Front fly and button closure. - One zippered pocket and one hand pocket provide convenient, secure space to store your trail essentials. - Removable liner with Mountain Body Geometry chamois is light and breathable, while the chamois effectively relieves pressure on the soft tissue and encourages proper blood flow. - Side waist adjustment tabs ensure that the fit of the shorts is easily customizable and dialed-in, even when your pockets are loaded. - VaporRize woven fabrics are durable, stretchy, and lightweight for peace of mind on the trail.

This much-loved icon of the MTB scene was originally developed by working with London delivery couriers back in the day. We asked them what they needed in a pair of urban cycling shorts and Hummvee was born. So versatile a product, it was adopted by mountain-bikers, and can be seen on both the trail and the daily commute. The short is made in a tough nylon mini-ripstop fabric with DWR finish for effective spray protection. There are no less than 6 pockets on this short: 2 rear Velcro pockets, 2 zipped side-pockets and 2 smaller thigh-pockets for your change and keys. Tried and tested, this short has outlived many a bike and we have worked hard to ensure that its durability will not disappoint. They incorporate a tough nylon and are double stitched in critical areas, making them nearly indestructible. - Durable Nylon mini-ripstop fabric with DWR finish - Includes Clickfast detachable liner with 200 series pad - Zipped thigh vents with mesh inserts - Zipped hand pockets, cargo pockets and large rear map pockets - Durable, seamless seat panel - Articulated knees and rear calf - Rear elasticated waistband and adjustable belt - High Mobility Multi-use Versatility—HuMMVee

Super lightweight all-rounder - Lightweight, durable, 4-way stretch Nylon fabric - Includes Clickfast detachable liner with 200-series pad - Mesh panel for enhanced ventilation - Hand pockets and zipped cargo pocket - Durable seat panel - Elasticated waistband with integral belt - The only thing it’s not light on is features!

- Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage

• Lightweight, slip on, soft knee pad provides functional coverage. • Articulated, perforated neoprene chassis delivers an ergonomic and comfortable fit. • Knee-cup area padding with an abrasion resistant outer panel ensures proper coverage and durability. • Lightweight rear stretch panel allows for bind-free range of motion and moisture control.