Parts & Accessories
Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure. - Fits Presta/Schrader - Accurate up to 160psi - Shows PSI and bar - Weighs only 37g
- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly
Mounting Kit for Mountain Morph and Turbo Morph G.
Replacement parts for JoeBlow Pro and JoeBlow Booster.
Topeak Pump replacement parts and accessories. Includes all parts needed to rebuild TwinHead pumps.
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.
A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.
Upgrades any pump to a SmartHead pump head. Includes hardware, 40-inch hose, and SmartHead pump head.
Upgrade any pump to the TwinHead pump head.
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
Easy-to-read digital gauge can be attached to a pump or used alone and provides accurate pressure readings up to 300psi / 20.7bar. Rotating head works with Presta, Schrader or Dunlop valves on bike / motorcycle / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. The air release button allows fine tuning pressure. Specs - PUMP HEAD COMPATIBILITY: Presta / Schrader pumps - TIRE VALVE COMPATIBILITY: Presta / Schrader / Dunlop valves - GAUGE: Digital, 300 psi / 20.7 bar - UNIT: psi, bar, kg / cm2 - BATTERY: CR2032 x 1 (included) - THUMB LOCK: Aluminum - PRESSURE TUNING: Air release button - BODY: Aluminum / Engineering grade polymer - SIZE: 9.2 x 5.8 x 4.3 cm / 3.6” x 2.3” x 1.7” - WEIGHT: 102 g / 3.60 oz Added Features: - Rotatable head / gauge - Auto-off function
An aluminum air chamber with inflator head that stores an air charge of one liter, up to 200psi / 14 bar. Works with a floor pump to quickly fill your tires and ensures proper installation on a tubeless rim at home. Once you flip the selector from "CHARGE" to "INFLATE" mode, air bypasses the chamber as you use the floor pump to inflate your tire to the perfect pressure. An integrated flexible hose with pump head works with Presta and Schrader valves and takes stress off the valve stem while pumping. - Pump Head Compatibility: Presta pumps - Tire Valve Compatibility: Presta / Schrader valves - Air Chamber: One liter, Store up to 200psi / 14 bar air pressure (Varies with the pump capacity) Working Pressure - 1800psi / 124 bar - Material: Aluminum / Rubber / Engineering grade polymer - Flexible hose - Weight: 985g / 2.17oz (Total) 820 g / 1.81lb (Air chamber) - Hose Length: 26 Size - 36 x 11.4 x 8.6cm / 14.2" x 4.5" x 3.4" (Total) - 28.5 x 8.1cm / 11.2" x 3.2" (Air chamber)
- Ball-inflating needle for footballs, basketballs and more
- Genuine Sunlite replacement hose - Type: Fits Sunlite Frame Pump : 5.25mm
Replaces worn end on any pump hose. - Head Type: Schrader
• Secures frame pump to frame • Nylon • Also good for use as a watch band
- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm"
- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm
• Presta and Schrader valve compatible head • Hose and head kit fits most floor pumps
The Iconic SILCA 24.1 gasket is the heart of the press-on Presta chuck. The current 242 gasket utilizes a high tech and very red, fully synthetic elastomer base material.
The factory replacement for SILCA Press on Disc Chucks. The 252 replace the classic SILCA 25.1 gasket after more than 20 years in the market. This unique gasket borrows from industries which require air-tight seals in the harshest of environments. The 252 gasket utilizes a high tech, full synthetic elastomer base material. It tests to a life expectancy of more than 5X the carbon filled rubber or Buna-N materials used previously. In tests with a major disc wheel manufacturer, the current SILCA Disc Wheel Adapter with 252 gasket excelled by posting a blow-off pressure of 393psi where other designs were unable to reach 120psi. Older versions of the SILCA Disc Wheel Adapter will still benefit for the new gasket, but have a lower hands-free max pressure.
Replacement gasket for the SILCA HIRO Chuck
Replacement gasket for reversible brass chucks, modern Impero Frame Pumps, and Pocket Impero
This chuck comes from the same vendor who supplied them to SILCA pumps for more than 25 years. It makes a great replacement or addition if you are buying a new Stainless Presta chuck or CP1 Disc Adapter for your older pump. This part is made from nickel-plated brass and uses an o-ring to seal the connection. - Hose barb fits into all SILCA hoses both old and new - Threads onto Schrader valves and all SILCA chucks with male Schrader threads (17-4 Presta chuck, HIRO, and CP1 Disc Adapter) - All metal construction, nickel-plated brass
n partnership with the rubber and tire experts at Continental , we are offering a custom extruded 3/16" ID air hose compatible with all historic PISTA Handles.
Years ago while Josh was working with the Team CSC at the Dauphine Libere, he noticed one of their mechanics using the most amazing little chuck to manage the disc wheel inflation. Unlike anything he had seen before, it was all metal and used a 'lollipop' lever on the side to lock onto the valve stems in disc wheels. The mechanic explained that these were made in Japan and were coveted by all the Euro-Pro mechanics due to their scarcity. So Josh set out to improve the design and make it available to cyclists everywhere. - Full metal construction, guaranteed for 25 years and covered by SILCAShield - Can effectively seal on valve stems as short as 10mm! - Uses SILCA 254 High-Tech Elastomer gasket - Adjustable gasket pre-load allows for a custom fit on any valve as well as compensation for gasket wear - Male Schrader thread fits into any Schrader chuck, or use SILCA Thread-On Schrader Adapter to fit a bare hose - Bullet-proof high-pressure, disc-compatible chuck for high-pressure situations.
Head Washer for 2371 Head
Bag of 3 replacement washers for EVA heads on all SKS floor pumps
Page 1 of 3 Next page